Peaty's HoleShot Tubeless Puncture Plugger Repair Kit

The quickest and easiest way to fix punctures that sealant can't. Without a tyre plug, a tyre with a snakebite would typically end up with an innertube in it or worse - going in the bin!

Not Just An 'Off-The-Shelf' Product

Tubeless tyre plug tools have existed for years. Most have taken what existed already for motorbikes and just shrunk it for mountain bikes. Here at Peaty's, they have redesigned the tubeless tyre plugger to make fixing your tyre as simple and easy as possible.

Small and Compact

The plug sheets store within the tool itself and the whole thing is designed to be as small and lightweight as possible for easy storage.

Save A Tyre, Save A Ride

When you ride tubeless, you need to be prepared for every eventuality. There are some holes you just can’t fix with tubeless sealant. Without a tyre plug, a tyre with a snakebite would typically end up with an innertube in it or worse - going in the bin!

Unique Fork Design

Peaty's unique single-sided fork design allows for multiple plug sizes to be easily rolled into the dip of the fork and pushed straight into the tyre. This is super quick to apply and delivers perfect results every time.

Designed By Riders, For Riders

Made from high quality 316 stainless steel, the fork has been designed to reduce the chance of you puncturing your rim tape when inserting a plug. It also has a reaming texture on the shaft, to clean out punctures before plugging, and to be as slim as possible, so it doesn’t widen the size of the hole already there.

• Material: 316 Stainless steel (fork) & anodised 6061 aluminium (body)
• Applicable for MTB, road, gravel & cyclocross tyres
• The quickest and easiest way to fix punctures that sealant can't
• Unique single-sided fork design - simply push and roll the plug into the hook of the fork
• Leaves the plug in place each time without pulling it back out of the tyre
• The fork is sharp tipped & as slim as possible so it doesn’t widen the size of the hole already there like most traditional products on the market
• Knurled body and ribbed lid / handle for extra grip
• Weather sealing o-rings make the tool waterproof when assembled
• What's in the box: 1 x HoleShot puncture plugger, 3 x 3mm plugs & 3 x 1.5mm plugs

Instructions:

1. Unscrew the lid from the tool, remove the plug sheets and put them somewhere safe.
2. Screw the cap onto the base of the fork to create a sturdy handle.
3. Find the puncture and remove any debris by cleaning the hole using the spikey knurled texture on the fork shaft.
4. Choose the right sized plug to fill the hole, it's always best to go slightly bigger than the hole - too small and it’ll pull back out again.
5. Roll the middle of the plug tightly into the dip of the fork.
6. Pinch the tyre tightly to isolate the puncture then - taking care not to push too far in and pierce the rim tape - push the plug into the hole, leaving about 10mm sticking out.
7. Pull out the fork, making sure you leave the plug inside the tyre.
8. Wrap the plug sheets back around the fork and screw the lid back on.
9. Re-inflate to the right pressure with your Holeshot CO2 Tyre Inflator.
10. Ride!

Buy Peaty's Puncture Repair Kit from New Era Cycle online bike store. The best bike accessories, parts and components shop.